Durchlaufmischer G50S

The powerful continuous mixer to mount at all standard dry mortar silos


The continuous mixer G50S is the right installation device to fix at all standard silos or to use with big bags.
The control panel is easy to separate when the mixer is not in use and also the best protection against theft.
This simple to dismantle electric driven mixer is equipped with a plastic mixing tube for easy cleaning and improved wearing quality.

  • The G50S is a professional continuous mixer with a powerful 400V drive. 

    This automatic mixing unit is to fix below a standard silo and works with any preblended dry mortar, concrete or screed. 

    All such materials up to 8mm grain size will be continuously mixed with water for manually use or to feed a pump respectively a screed conveyor for professional and efficient processing. 

    With an optional hopper and undercarriage the G50S can be used with bagged mortar, too. 

    We recommend the G50S for processing of:

    • cement mortar
    • lime-cement mortar
    • self-levelling underlayment
    • reinforcement or bonding mortar
    • finish or decoration plaster
    • masonry mortar
    • fire proofing mortar
    • shotcrete
    • floor-screed
    • fine concrete
    • etc.
  • Just fix the G50S below the silo flange. 
    Connect the unit with a water hose and with a 400V supply. 
    Open the silos butterfly valve and press the start button. 

    A powerful 5.5kW drive activates the dosing shaft inside the dry material zone and the positive locked mixing shaft inside the mixing tube. 

    The dosing shaft provides a constant flow of dry mortar into the mixing tube and an adjustable water metering device adds water and allows to set up the consistency of the wet mix.

    The paddles of the rotating mixing shaft prepare a homogeneous mixture until you stop the whole process by pushing the stop button.

  •   G50S
    Power supply 3~400V/50Hz
    Output 50l/min
    Grain size up to 8mm
    Electric motor 5.5kW
    Mixing speed 262rpm
    Flange connection ID 250mm
    Water connection Geka 3/4“
    Water input pressure >2.5bar
    Weight 110kg
    Dimensions LxWxH 1800x600x450mm
    Part no. 500035
    Standard equipment: socket for vibrator
  • 600006 Set for water connection plus vibrator 600006
    600066 water hose 1/2", 10m, Geka
    600114 Geka coupling external thread 3/4"
    600115 Geka coupling external thread 1"
    600120 Geka coupling internal thread 1"

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.


Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.