Pneumatic Conveyor M700

The electric driven pneumatic conveyor Mixokret M700


The pneumatic conveyor Mixokret M700 with its 7.5kW electric drive is the reasonable priced solution for mixing and conveying of floor screed, mortar, concrete or even sand.

For conveying is a separate site compressor with >2.5m³/min air volume necessary.
The economic Mixokret M700 is characterized by simple operation, easy handling and low maintenance.

  • The Mixokret M700 is an electric driven pneumatic conveyor without bells and whistles.

    It is the most economic solution when already a huge site compressor is available.

    Minimum requested air volume is 2.5m³/min, we recommend approx. 4m³/min air volume. 

    The Mixokret M700 works great with all semi-dry and lean wet mixes, as well as dry materials which can‘t be pumped with worm or piston pumps, such as: 

    • cement based floor screed
    • anhydrite based floor screed
    • mortar
    • fine concrete
    • sand
    • gravel
    • roof covering
    • soil
    • etc.

    all up to 16mm, with some small modifications even up to 25mm grain size. 

  • The pressure vessel is filled manually with a shovel and bucket.

    Mixing paddles inside the vessel will prepare a high-quality wet mixture if required and the connected site compressor, which is not included in the scope of delivery, will provide air to convey the material from the closed pressure vessel through the hoses to the discharge stand at the end. 

    The better the performance of the separate site compressor, the faster and longer distance can be conveyed. 

  •   M700E
    Power supply 3~400V/50Hz, CEE 32, 16Amp fuse
    Output* 3.8m³/h
    Conveying distance* 120m
    Conveying height* 60m
    Drive 7.5kW
    Vessel capacity 260l
    Compressor** >2.5m³/min, <7bar
    Filling height 860mm
    Grain size up to 16mm
    Outlet KKV70
    Chassis without brakes, to be driven on job site, not approved for road use
    Weight 700kg
    Dimensions LxWxH 2670x1280x1190mm
    Part no. 500055
    P/N for 3~230V/60Hz 500056
    Standard equipment: discharge stand

    * output and conveying distance/height depending on the air volume provided by the site compressor
    ** the site compressor is not included in delivery
  • 600228 Set for conveying up to 8mm grain size 600228
    600227 reduction KKM70-V50
    600062 mortar hose ID50mm, 40bar, V50/M50,10m
    hose holder
    600180 hose holder
    600175 sponge ball ID50mm
    600230 Set for conveying up to 16mm grain size
    600226 conveying hose ID65mm, KK70,10m
    hose holder
    600180 hose holder
    600004 sponge ball ID65mm
    600283 Set for conveying of concrete up to 25mm grain size
    600412 special outlet with KKV108 coupling
    600280 conveying hose ID90mm, 10bar, 10m, KK108
    concrete discharge stand, KKM108 coupling
    600281 concrete discharge stand, KKM108 coupling
    600282 sponge ball ID90mm

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.


Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.